Change of crown diameter with dbh of mahogany

Change of crown diameter with dbh of Swietenia macrophylla (mahogany)

even-aged monocultures

Shanika Lakmali and Upul Subasinghe

Paper presented for the 14th International Forestry and Environment Symposium 2009

Mahogany is one of the renowned timber species for its beautifully grained, hard and red-brown wood. It is an introduced timber species, dominated in Sri Lankan forest plantations with fast growth rates and higher timber value. Mahogany plantations are widely established in the intermediate zone and low country wet zone in Sri Lanka. Recently, private sector has started to establish of mahogany monocultures with shorter rotations to gain high income.

Due to the lack of research studies on mahogany, the objective of the present study was to establish an empirical model to predict crown diameter accurately using dbh. For this purpose, data were collected from 16 mahogany monocultures in Kalutara, Ratnapura and Matale districts. In order to represent the whole plantation, sixty trees were selected from good, moderate and poor areas from each plantation.

In order to build a reliable model, theoretical basic structures were developed assuming the crown diameter is a function of tree dbh. This basic structure was fitted to the data as linear, exponential, and logistic form separately for different growth types. In addition to the untransformed variables, transformations were also made whenever possible. Suitable candidate models were preliminary selected by R2 and residual distributions. After further analysis, it was proven that the best results were given by the logistic model structure for good, moderate and poor site types (R2 = 92.0%, 71.4%, 65.9% respectively). In order to eliminate the difficulty of using separate models for different growth types, the possibility of using a common model for all growth types were tested. For this reason, one way ANOVA was used for residuals of different growth types generated after fitting respective models. Results indicated that it was possible to use a common model and therefore the logistic form was re-fitted to pooled data.

The final model was “crown diameter = 0.645 + 2.682 / (1+exp (-0.356 (dbh –7.749)))” and it had a R2 of 60.9%.